Gradall 534D-10 Service Manual - Manual (Page 65)

expect from the other, and when to expect it.
Be sure you understand all steps of the procedure before testing, adjusting or repairing any component or
mechanical assembly. Follow the procedure carefully.
Always wear safety glasses, hard hat and any other locally required safety-related, protective apparel when
performing testing and adjusting procedures.
Thoroughly clean all areas before working on them. Slippery and contaminated surfaces can cause serious
accidents or mechanical failure if not removed.
Remove key from ignition and place a sign in the operator’s cab informing all who come in contact with the
machine that it is being worked on and that personnel are on the machine.
Double check bolt torques.
Check that all lubrication fluids are at the correct level.
Remove mechanical restraints before restarting and operating the machine following repairs.
Clear all personnel from area adjacent to the machine when first operating after a repair or adjustment. This can
eliminate the possibility of personal injury if repairs or adjustments were performed incorrectly and/or if the
machine performs in an uncontrollable or unexpected manner.
Clean machine surfaces before returning it to work.
General Warning Information (continued)
Form No. 29633 3/97
(iv)
Always mechanically secure machine components that could suddenly start in motion and cause injury or damage.
Do not move any function.
WARNING
5.
6.
7.
8.
9. 9. 9. 9. 9.
10.
11.
12.
13.
14.