ARB RD87 - Manual (Page 23)

3 Installing the Air Locker
21
3.10 Reinstalling Differential and Axles
c Replace the paper gasket on the axle housing flange.
c Reinstall the third member to the differential housing according to
your vehicle service manual.
c Reinstall the drive shaft.
c Replace the axle seals if necessary and fit to the axles.
c Insert both axles fully into the housing, engaging splines, and then
gently tap them inward.
NOTE : Be careful not to damage the axle shaft oil seals when
installing the axle. Support the axle’s entire weight
where possible.
c Torque down the axle bolts to manufactures specifications.