ARB RD197 User Manual
Rd197, Installation guide
Advertising
Table of contents
Document Outline
- INSTALLATION GUIDE
- ARB 4x4 ACCESSORIES
- 1.1 Pre-Installation Preparation
- 1.2 Tool-Kit Recommendations
- 1.3 Assembly Type Identification
- 2.1 Vehicle Support
- 2.2 Differential Fluid Drain
- 2.3 Disconnecting the Axles
- 2. 4 B Marking the Bearing Caps
- 2.5 Checking the Current Backlash Amount
- 2.6 Removing the Differential Center
- 3.1 Re-Mounting the Ring Gear
- 3.2 Drilling and Tapping the Bulkhead Port
- 3.3 A Profiling the Seal Housing Tube
- 3.4 Assembling the Seal Housing
- 3.5 Installing the Carrier Bearings
- 3.7 B Profiling the Seal Housing Tube
- 3.8 Checking the Backlash
- 3.9 Setting Up the Bulkhead Fitting
- 3.10 Reinstalling Differential and Axles
- 4.1 Mounting the Solenoid
- 4.2 Running and Securing the Air Line
- 4.3 Connection to the Bulkhead Fitting
- 5.1 Mounting the Actuator Switch(es)
- 5.2 Wiring the Actuator System
- UP
- SWITCH
- SINGLE Air Locker SYSTEM
- DUAL Air Locker SYSTEM
- 6.1 Leak Testing
- 6.2 Testing the Air Locker Actuation
- 6.3 Re-Sealing & Filling the Differential
- 6.4 Post-Installation Check List
- 7.1 Exploded Assembly Diagram
- 7.2 Itemized Parts List