ARB RD197 - Manual (Page 24)

3 Installing the Air Locker
22
3.7 B Profiling the Seal Housing Tube
 Without using sharp jagged tools such as pliers (your hands are the
best tool for this job) gently bend the seal housing tube in a shape
that will clear the differential and housing, and exit through the
bulkhead port as shown in Figure 17.
 Trim the tube to length using an automotive brake line tube cutter.
NOTE : Never use a hacksaw to cut the seal housing tube as
this will leave metal filings in the air system.
Figure 17.
Figure 18.