ARB 4411010 User Manual
Page 2
If you have any queries regarding the installation of this product please contact the distributor from whom it was purchased, or alternatively the ARB office in your state.
Head Office – ARB Corporation Ltd VIC: 42-44 Garden Street, Kilsyth, Victoria, 3137 Tel: (03) 9761 6622 Fax: (03) 9761 6807
WA: (08) 9244 3553 NSW: (02) 9821 3633 ACT: (02) 6280 7475 SA: (08) 8244 5001 QLD: (07) 3872 3872 NT: (08) 8947 2262 TAS: (03) 6331 4190
9. Fasten tread plate to the rear rails using M6x25mm dome head bolts, nuts, flat &
spring washers. Before tightening the bolts, run a bead of silicon sealant between
the checker plate and the rear rail. This will prevent any rattling of the tread
plates.
12/02/03
2 of 4
3783025