ARB 4420100 - Manual (Page 3)

Last Rev Date: 05/05/2009 Page 3 of 3 Fitting instructions# 3783242
Copyright © 2005 by ARB Corporation Limited. All rights reserved, this document must not be reproduced without the express authority of ARB Corporation Ltd
1. Place the rubber plugs supplied into the
ends of the rock sliders.
2. With the help of another person,
carefully lift the rocker rails up to the
chassis. Fix in place using the M8 x
25mm bolts, M8 spring washers and M8
x 24mm flat washers.
NOTE: Carefully position the rear bracket
over the hand brake cable.
3. Repeat for the other side and tighten all
bolts.
NOTE: If jacking the vehicle from the rails,
do so only between the chassis brackets.