ARB 5421110 - Manual (Page 8)

Last Rev Date: 14/01/14 Page 8 of 8 Fitting instructions# 3787952
Copyright © 2005 by ARB Corporation Limited. All rights reserved, this document must not be reproduced without the express authority of ARB Corporation Ltd
16. Remove original transfer case shield and
retain bolts. Remove four lower case bolts
and retain. Fit transfer panel as shown using
original bolts. Fit remaining bolts into original
mount positions at rear.
M8 - 22 Nm.
FITTED PRODUCT
PLUG USING
ORIGINAL BOLTS
PRADO 150 KINETIC SHOWN