ARB 82QT-10800782 - Manual (Page 17)

6.8 Turning the fridge freezer on or off
To turn your ARB Fridge Freezer on:
Press and hold for between two and three seconds.
When the fridge freezer is on, the power LED will light up green.
The display will show the current cabinet temperature.
NOTE - The current cabinet temperature is a reading of the temperature at the cen re of
the cabinet. The temperatu e at othe areas of the cabinet can deviate from this
temperatu e.
t
r r
r
To turn the fridge freezer off:
Press and hold for between two and three seconds.
When the fridge freezer is off, the power LED and the display will go blank.
6.9 Setting the target cabinet temperature
To set the target cabinet temperature of your ARB Fridge Freezer:
Turn the fridge freezer on.
Press once to display current cabinet target temperature.
Press to increase the target temperature by one degree.
Press to decrease the target temperature by one degree.
Continue pressing or until the desired target cabinet temperature is
reached.
After 5 to 6 seconds of inactivity, the display will flash twice and return to
displaying the current cabinet temperature.
NOTE - When the target temperatu e is reached, the compressor will stop running and
the Power LED will change to orange.
r
6.10 Changing between °C and °F
Your ARB Fridge Freezer is capable of displaying temperature in either degrees Celsius
(°C) or degrees Fahrenheit (°F.)
To change the display between °C and °F:
Turn the fridge freezer on.
Press twice to display current temperature unit setting.
Press or to change between °C and °F.
After 5 to 6 seconds of inactivity, the display will flash twice and return to
displaying the current cabinet temperature.
16