3 alarm setup – AKiTiO Taurus Mini Super-S3 LCM User Manual
Page 13
Advertising
Taurus Mini Super-S3 LCD Display
[11]
3.4.3 Alarm Setup
The general alarm sound is the short beep you hear when starting up the system and it will also
sound when something is wrong. To enable or disable the alarm, select ON or OFF respectively.
•
[ON] Beeper and alarm is enabled.
•
[OFF] Beeper and alarm is disabled.
Press the [OK] button to enter the setup menu and press the [Select] button to cycle through the
different options.
•
To exit the menu without changing any of the settings, press the [Select] button until you see
the Exit screen and then press the [OK] button.
•
To change the setting, press the [Select] button to choose your preferred mode and then press
the [OK] button to confirm the change.
Advertising