20 - english, Interrupting, changing or cancelling a cycle, Warning – Bosch SHV 6800 User Manual

Page 21: Cycle interruption, Cancelling a cycle, Changing a cycle

Advertising
background image

20 - ENGLISH

www.boschappliances.com

Power

Scrub

Plus

Delicate/

Econo

Regular

Wash

Rinse &

Hold

88

Cycle

Countdown

Cancel

Drain

On / Off

Power

O /O

U

O

Power

Scrub

Plus

Delicate/

Econo

Regular

Wash

Rinse &

Hold

88

Cycle

Countdown

Cancel

Drain

Cycle Interruption

As a safety feature the dishwasher will automatically
turn itself off whenever the door is opened. However,
if the door is opened quickly while in a wash or rinse
cycle some water may splash out of the dishwasher.
For this reason it is recommended that the machine
always be switched off before opening the door.

Cancelling a Cycle

Each control panel shows which buttons to simulta-
neously push to cancel a cycle. Refer to your dish-
washer to find the cancel drain buttons on your par-
ticular model.

INTERRUPTING, CHANGING OR CANCELLING A CYCLE

To Resume a Cycle

1. SHU/SHI models, close the door and

press the on/off button.

2.SHV models, push the on/off button

and close the door.

To Interrupt a Cycle

1. Press the on/off button to stop operation.
2. Wait at least 10 seconds (or until the water noises

stop) before opening the door.

1. Press the indicated buttons at the same

time and hold for approximately 3 seconds.

2. When the drain pump noises stop and the

LED display or clean light indicate that the
end of the cycle has been reached, the dish
washer is reset.

3. Press the on/off button to turn the

dishwasher off.

4. The dishwasher is now ready to run a

selected cycle. Add more detergent if
necessary.

WARNING

DO NOT PULL DOOR

FULLY OPEN WHILE

DISHWASHER IS IN

OPERATION. QUICKLY OPEN-

ING THE DOOR WHILE DISH-

WASHER IS IN OPERATION

COULD RESULT IN SERIOUS

SCALDING.

Figure 27

Figure 28

Figure 29

ON/OFF BUTTON

CHANGE CYCLE

CANCEL CYCLE

Changing a Cycle

For Bosch dishwasher models SHI 6800 and 4320,
SHU 5300, 5310 and 6800 press the program
button of the desired cycle TWICE. For all other
Bosch dishwasher models, press the program
button of the desired cycle ONCE. The chosen
cycle button (or the light above it) becomes illu-
minated, showing that it has been selected.
* SHU 3030 and SHU 3130 models do not have
program lights.

Advertising
This manual is related to the following products: