Fast & Fluid AT550 - Manual (Page 10)

p10
© Fast & Fluid Management, AT550
Operation
A - First time operation
Step 1 - Switching ON the dispenser & computer
> >
The machine is
automatically switched on
when the power connector
at the back of the
dispenser is plugged into a
220V or 100V-110V wall
socket.
* We recommend to keep
the machine on at all
times. The dispense abort switch
must be released. The green button only
swithces internal wall socket.
Step 2 - Setting the stirring time
>
The stirring time and interval c an be altered from its default
settings*. This can be done through the dispenser software, check
your software manual for instructions.
Please ask your paint supplier for optimal agitation settings for
your specific colorant products.
* Default value is 180 seconds of agitation every 3 hours.