Fast & Fluid GA450 - Manual (Page 19)

Operator manual GA450 V. 2.2
19
3.6 Remove spilled paint
Do this procedure when paint is spilled inside the machine.
1. Make sure that the machine is stopped. See § 3.2.5 or § 3.2.7.
2. Put a reservoir (A) below the drain orifice (B).
3. Remove the cap (C) from the drain orifice. The spilled paint
comes out of the machine.
4. Dispose of the spilled paint according to local regulations.
5. Install the cap to the drain orifice.
6. Clean the machine. See § 3.3.
C
B
A
B
CAUTION
Make sure that the reservoir is big enough to
hold all the spilled paint.