Fast & Fluid Giotto Column - Manual (Page 21)

Fast & Fluid Management
A Unit of IDEX Corporation
________________________________________________________________________________
________________________________________________________________________________
20
1154915C-it,en,fr.doc - 15/10/2003
The electrical plug has to be connected to a mains socket which is correctly earthed.
During any maintenance operation or by any intervention on the machine , the electrical plug must
absolutely be extracted from the socket.
Before starting the machine with the timer, verify that all covers of the containers have been correctly
blocked.(DIAGRAM 6)
The sound emission relative to the work station is less than 70 dB.
14.- WHAT TO DO IF. . .
- The colourant comes out in spurts of colourant during the dosing action.
>> Check of the quantity of colourant inside the canister.
Operate on the pump, without opening the valve , several times so the air can go
back into the canister.
- Colourants appears on the piston shaft or at the bottom of gauge.
>> This problem indicates that the seals are worn. Replace referring to
"REPLACEMENT OF PISTON SEAL".
- Difficult rising action for piston
>> Each canister is equipped with three different diameter nozzles. Increase the size for this
colourant. If this action doesn' t solve the problem, clean the canister, the pump and replenish
with fresh colourant.