Fast & Fluid HA-mII mediumII - Manual (Page 10)

4 Positioning / Installing the machine 8
4.3.2 Mounting of monitorstand (HA-mII)
The monitorstand can be mounted on either side of the machine. It is normally mounted on the right
hand side. To mount it on the left hand side the screenbracket behind the side panel should be
positioned on the righthand side.
Positioning of monitorbracket
1.
Mount the hangingbrackets on the right (or left) side of the machine.
2. If a mouse-/printersupport is supplied, attach these to the monitorarm before attaching to the
machine. The mouseplate attechment is simplified by turning the monitor/keyboard support
upside down.
3. Finally mount the whole assembly onto the machine. The height can be selected to suit the
individual (the lowest position is standard).
When using a flatscreen a mousetray can be attached (see figure 7).
Attachment bolts
Figure 6 Figure 7
Monitorbrackets
Muis /
printersupport
Monitor /
keyboardarm
hangingbrackets