BNC 745 - Manual (Page 23)

Model 745 Digital Delay Generator. November 2013
DELAY? Tx
Form: Set & Query
Description: Delay time of channel Tx relative to channel Ti (reference channel)
is set to delaytime picosecond
Parameter: Tn: channel number 1 to 4 (or 1 to 8 for 8 channel)
Ti: channel number 0 to 4 (or 0 to 8 for 8 channel)
Tn and Ti have to be different
delaytime: picosecond delay
RST value -
Specified limit 0 to 19 999 999 999 999 picoseconds
Example: Set : program 1ns to channel 2 relative to channel 1 : DELAY T2, T1,
1000.75
Query: DELAY? T2 => :DELAY T2, T1, 1000.75
Note : By using the Web page or Telnet command to configure the
device, user can specify delay with 0.25ps resolution.
ABSOLUTE DELAY
Syntax: ABSDELAY? Tx
Form: Query
Description: Absolute delay time of channel Tx in ps
Parameter: Tx: channel number 1 to 4 (or 1 to 8 for 8 channel)
RST value -
Specified limit -
Example: Query: ABSDELAY? T2 => :DELAY T2, 5000.75
TRIG
Syntax: TRIG Tx,DEC
TRIG? Tx
Form: Set & Query
Description: Tx trigger mode selection: set trigger mode to internal, external,
manual or off.
Parameter: Tx: channel number 1 to 4 (or 1 to 8 for 8 channel)
DEC: trigger mode : IN1, IN2, EXT, SS1, SS2, SSE, LSS, BST, OFF
RST value off
Example: Internal mode to channel 2 : TRIG T2,IN1
Query mode to channel 2: TRIG? T2 => :TRIG T2,IN1
AMPLITUDE
Syntax: AMPL Tx, mV
AMPL? Tx
Form: Set & Query
Description: Tx channel voltage level setting
Parameter: Tx: channel number 1 to 4 (or 1 to 8 for 8 channel)
mV: Volt Amplitude in milliVolt
RST value -
Specified limit 2000 to 5 000 mV
Example: 2.5 V to channel 4: AMPL T4,2500
Query mode to channel 4: AMPL? T4 => :TRIG T4,2500
© Berkeley Nucleonics Corp. 22 Model 745 User Manual