BNC 645 - Manual (Page 33)

33
4
Waveform Output Operations
This chapter describes each of the waveforms that Model 645 provides
and also the detailed front-panel, menu and remote interface operations
for outputting the waveforms.
4.1 Sine Wave
How to generate a sine wave
1. The default waveform output of Model 645 is sine wave. To select
sine wave while the current output function is not it, press the Sine
button to make the selection.
2. Refer to Chapter 3 for configuring common parameters, which
include frequency/period, amplitude and dc offset voltage.
3. To view the waveform parameters in the graph mode, press the
Graph button.
Figure 4-1
Remote interface operation
APPLy:SINusoid [<frequency>[,<amplitude>[,<offset>]]]
or
FUNCtion {SINusoid}
FREQuency {<frequency>︱MINimum︱MAXimum}
VOLTage {<amplitude>︱MINimum︱MAXimum }
VOLTage:OFFSet {<offset>︱MINimum︱MAXimum }