SkyTrak 8042 Operation Manual - Manual (Page 47)

Operation
45 Model 8042 Rev. 11/03
Worklight Switch (Front, Rear & Boom Worklights)
This three position rocker switch (2) controls the front, rear and boom
worklights. The switch is located in the upper switch bank on the right side
dash panel. These lights will only operate when the ignition switch is in the
RUN position.
• Push the top of the switch in to turn all the
worklights OFF.
• To turn the front and boom worklight ON,
position the rocker switch to the center
position.
• Push the bottom of the switch in to turn all the
worklights ON.
OH2570
OH2591
OH2611
OH2601
OH3300
2