SkyTrak 8042 Operation Manual - Manual (Page 63)

Operation
61 Model 8042 Rev. 11/03
Locked Mode
With the boom above 40° (4) and by activating one or more of the functions
(as follows), the Stabil-TRAK system is in the LOCKED MODE (5). The rear
axle is locked so it is rigid with the frame. The Stabil-TRAK light will be ON
(6).
• Engaging the parking brake switch
• Placing the travel select lever in (N) NEUTRAL
• Depressing and holding the service brake pedal
The frame sway will function slower than normal in this mode.
OH0713
4
5
6