SkyTrak 6036 Tier II Operation Manual - Manual (Page 138)

132 Model 6036
General Maintenance
A. Axle Oil Level Check
(250 Hour Intervals)
1. Level the vehicle, ground the carriage, place the travel select lever
in (N) NEUTRAL, move neutral lock lever to NEUTRAL LOCK posi-
tion, engage the parking brake switch and shut off the engine.
2. Clean the area around the axle fill plug (1) and the axle level plugs
(2) on the opposite side of the axle and remove the plugs from the
axle housing.
3. Add Universal Tractor Fluid to bring the oil level up and even with
the plug holes. See chart of approved fluids above.
4. Re-install the axle fill plug (1) and axle level plugs (2).
9. Axle Oil
APPROVED UNIVERSAL TRACTOR FLUIDS
JOHN DEERE
FORD / NEW HOLLAND
MASSEY FERGUSON
CHEVRON
JDM J20C (HY-GARD)
ESN-M2C134-D (HYDRAULIC OIL134)
M-1141 (PERMATRAN III)
CHEVRON 1000 THF
250
OH2710 OT0460
OA1320
1
2
FRONT AXLE SHOWN - REAR
AXLE SIMILIAR
3