PureFlow AirDog DF-165 - Dodge Cummins 1998.5-2004 - Manual (Page 10)

10
PureFlow AirDog
AirDog
®
II Dodge 1998 ½ - 2004
Section 4 AirDog ® & Mounting Brackets
Installing the AirDog
®
& Mounting Brackets on the Truck’s
Frame, cont’d!
NOTE: The AirDog®II can be mounted on the inside or the outside of the frame. Some bed and
cab configurations may only allow system to mount system on outside of the frame.
Mount
The AirDog®
Outside
The
Frame
Figure 9 OR Figure 10
Inside
The
Frame
Figure 11 Figure 12
For this installation, the AirDog
®
II is mounted inside the frame!
4-6. Clamp the frame between the AirDog
®
II bracket assembly and the backing plate using
the bolts, lock washers, and nuts included in the kit. Be sure to adjust system so It’s
at its highest point to avoid debris from the road.
Figure 13
Figure 13A
Figure 13B
NOTE: Some pickup model frame rails have a bracket that is used to support the frame during
the manufacturing process If this bracket is on your frame rail and obstructs the proper
positioning of the AirDog
®
II mounting bracket, you may remove part or all of it, as needed. Be
very careful not to damage the frame flange!