PureFlow AirDog FP-150 - Dodge Cummins 2005-2013 User Manual
Page 3
3
OVERVIEW
Welcome to PureFlow
®
AirDog
®
Fuel Air Separation, Filtration and Delivery System for the Diesel
Engine!
The AirDog
®
Fuel Air Separation system is a Premium lift pump and filtration
system for the Dodge Cummins diesel engine. A complete installation kit is
included.
The AirDog
®
delivers clean fuel to the engine free of virtually all air/vapor and
at a positive flow. Thus, allowing the engine “test cell” performance and
efficiency, while in “real world” use.
The AirDog
®
FP-100 is recommended for stock and slightly modified 5.9 L &
6.7L Cummins Diesels.
The AirDog
®
FP-150 is recommended for highly modified 5.9L & 6.7L
Cummins Diesels.
PureFlow products are manufactured with a personal touch,
unsurpassed attention to detail and
the most stringent quality control!
TYPICAL INSTALLATION LAYOUT
Figure 1
The AirDog
®
draws fuel from the fuel tank at a constant flow, removing water, particulates,
and air/vapor. A regulated pressurized flow is maintained to meet the engine’s varying fuel
demands. The separated air/vapor is returned by the AirDog
®
to the fuel tank.
NOTE: The pictures used in this manual are for example only and may not be exactly the
same as your truck.