Hornady 366 AP Loader - Manual (Page 5)

5
FUNCTION AND ADJUSTMENT
Fig. 1: Function and Adjustment
The following is a detailed description of the operation and adjustment of the 366 Auto
Reloading Press. This press has been pre-adjusted at the factory for Remington STS cases, but
every person has a preference about how the finished product should look, so some changes might
be necessary. The reloader should begin by advancing a single shell through each station to
familiarize himself with the operation and adjustment of each position. The illustrated
discussion which follows shows the 366 with all eight stations filled. Since your first shell will be
the only one in the loader, be sure the shot and powder slides are off at the beginning of the
sequence.
Sort your shot shells by brand and type. Refer to the loading manuals provided for
recommended loads for your shot shells.