Hornady 366 AP Loader - Manual (Page 9)

9
Step 4: STATION THREE (Drop Powder)
Fig. 5: Powder Drop
Before pulling the handle (#37), pull the powder slide (#69) toward you. The spring (#71)
will lock the slide in place in the second slot of powder slide (#69). The powder drop is now
on. During the stroke, the powder bushing will advance to the Powder Drop station.
Normally, we would leave the powder slide on, but since we are taking one shell through each
step, push the powder slide back and shut off the powder. (Do this before pulling the handle
again.)
There is no adjustment to the powder drop, but the drop tube should be kept clean and dry and
must be able to float freely in the head casting. To clean the drop tube, use brake cleaner to
remove all oils.