Bushnell ImageView 11-1211 User Manual
Page 10
10
USING THE IMAGEVIEW WITH YOUR COMPUTER:
1. The camera will be recognized as a USB mass storage device (if it is set to "STO" and not "PC"), which
means no special drivers are required for all operating systems later than Windows 98 (Me, 2000, XP,
Vista.) Mac OS 9 and OSX are also compatible. If you have a PC running Windows 98, you must
install the driver found on the included CD-ROM BEFORE CONNECTING THE CAMERA TO
YOUR PC.
2. If you have a computer OS as listed above that is USB mass storage compliant, a new disc icon will
appear in Windows Explorer (under “My Computer”) as a new “Removable Disc” after plugging in the
USB cable from the Imageview. Mac users will see the new disc device appear on their desktop. Clicking
on the new disc icon will show the contents, a folder named “DCIM.” The image folder inside this
contains your photos, stored as JPEGs (.jpg file format). They may then be viewed, edited, renamed
and saved using any photo or graphics software that accepts .jpg files. If you do not have software that
will open .jpg files, you should install Roxio Photosuite 5 (Windows 98, 2000 or XP only) from the
included CD-ROM. See “Software Installation” for instructions.
3. After you have copied or opened and saved the photo files to your computers hard drive, you may
disconnect the Imageview camera (NEVER disconnect the camera while files are still being transferred
to your computer.) Before disconnecting, you should “eject” or stop the "removable disc" representing
the camera to avoid an error message (not necessary with Windows XP).
4. See the following pages for full step by step instructions for downloading your photos to a computer.
ImageView 111211 1LIM draft.indd10 10
3/12/07 4:01:04 PM