Bushnell ImageView 11-1211 - Manual (Page 6)


Your ImageView is already set to high resolution and quality right out of the box, and it is not
necessary to make any special setting-you will normally get good photos by simply pressing
the SNAP button. However, as you might want to shoot a video clip, delete a previous photos,
or explore other options, we recommend you review the available optional settings listed on
the following pages.
To see and set these optional settings and special features, begin by briefly pressing the MODE
button-the display will show the main screen with these icons: a battery condition meter, card
icon (when an SD card is used), and the current settings for resolution (one or two stars) and
quality (HQ or SQ). At the top center of the display, you will see a number which indicates
the remaining photo capacity, based on available unused memory in internal RAM or the SD
card (if a card is inserted, all photos will be stored onto it from that point on).
To use the special features (self timer, video clip record, and sequence shot), press the MODE
button again while the main screen is still showing (it will "time out" and return to normal live
preview if no buttons are pressed in 5 seconds). Each time you press the MODE button, the
icon for the next feature will appear, until you return to the main screen again. To use a feature
(video record, for example), you must press SNAP while the feature's icon is displayed. See
"Special Features" for more details on each feature.
Using the Optional Settings and Special Features
ImageView 111211 1LIM draft.indd6 6 3/12/07 4:01:04 PM