Rock-Slide Engineering JK4 SLIDER User Manual
Slider installation
Advertising
Installation Instruction RSEI 109
JK4 SLIDER INSTALLATION
SL-4D-100-JK
SLIDER INSTALLATION
1. Remove the stock rocker guards if equipped
2. Remove the front body bolts on the driver and passenger side (under the front
door)
3. Loosen the rear body bolts (under rear passenger doors)
a. DO NOT REMOVE THESE BOLTS! You will need these bolts to support the
slider you are about to put into place on the Jeep
REAR
FRONT
Advertising