Rock-Slide Engineering STEP-SLIDER MAINTENANCE - Manual

Installation Instruction RSEI 133
MAINTENANCE OF THE STEP SLIDER
 Please note the R-SE Step Slider is a mechanical mechanism that requires maintenance to operate
properly. To keep the Step Slider operating at an optimal level it needs to be maintained with
lubrication. We recommend using a Teflon based lubricant (NOT WD-40) on the 7 indicated points
(pictured below). R-SE Step Sliders need to be lubricated at least monthly. Heavy trail use or
power washing the inside of the Step Slider will increase the frequency of required lubrication.
WITH THE STEP DEPLOYED, LUBRICATE THE FOLLOWING:
2
HINGE POINTS ON THE STEP PORTION (BACK SIDE)
4
HINGE POINTS IN THE BODY OF THE SLIDER (ALUMINUM BLOCKS)
1
MOTOR SHAFT (LIGHTLY) SO IT CAN TRANSFER THE LUBRICANT TO THE O-RINGS AS IT RETRACTS
THE R-SE STEP SLIDER IS DESIGNED TO BE A FRICTIONLESS SYSTEM. THE MORE FRICTION WE CAN
REDUCE, THE BETTER AND LONGER THE STEP SLIDER MOTOR WILL RUN
Thank you for choosing Rock-Slide Engineering products. We value your business and welcome your
feedback/suggestions. If you have any concerns please contact us directly at 435-752-4580.