J.P. Instruments EDM 730 Instrument Installation Manual - Manual (Page 30)

FAA APPROVED INSTALLATION MANUAL FOR THE EGT-701 Report 103
INSTALLING THE EGT-701 SCANNER® 1/20/09
Rev-E Page 30 of 30
Instructions for Continued Airworthiness (ICA)
There are no field adjustments and or calibration requirements for the EDM-700/730 series
instrument after initial installation. ICA is not required. Maintenance of nonfunctioning or
malfunctioning components is limited to removal and replacement of JPI factory supplied new or
repaired components as described in the troubleshooting section of the installation instructions