AEM 30-2131-XXX Brass Pressure Sensor - Manual

AEM Performance Electronics
2205 126 th Street Unit A, Hawthorne, CA. 90250
Phone: (310) 484-2322 Fax: (310) 484-0152
http://www.aemelectronics.com
Instruction Part Number: 10-2131 Rev C
 2012 AEM Performance Electronics
The model 30-2131-XXX family of pressure transducers is specifically designed for pressure measurements in automotive systems. The mechanical
connection is 1/8" Male NPT. Each sensor comes with a mating connector plug and pin kit. Sensors are not recommended for use with methanol.
Instruction Manual
P/N 30-2131-XXX Pressure Sensors
Kit Contents
Part Number Sensor Connector
30-2131-15G 15 Psig Included
30-2131-30 30 Psia (2 Bar) Included
30-2131-50 50 Psia (3.5 Bar) Included
30-2131-75 75 Psia (5 Bar) Included
30-2131-100 100 Psig Included
30-2131-150 150 Psig Included
Specifications:
Accuracy (Temp Included): < +/- 3% FS
Mounting Torque: 14.7 ft-lbf
Operating Temp: -20 to 105C
Burst Pressure: 2 X FS
Supply Voltage: 5V +/- 0.25V
Supply Current: 4.5 mA at 5VDC
Weight: < 60 Grams
Body Material: Brass
Wetted Material: 316L
Mechanical Connection: 1/8”NPT Male
Electrical Connection: Packard 3-Pin
Electrical Termination:
Signal Ground: Tap to Sensor/Signal Ground on EMS or AQ1
Sensor Power: Tap to Sensor Power +5V on EMS or AQ1
Signal: Connect to MAP/Input Channel on EMS or Input 1-8 on AQ1