Class1 Digital Pressure Service & Calibration - Manual (Page 2)

page 2 of 5 pages
Engineering
Standards
Name
Identifier Instructions
Engineering Standard Number
C1-102190-A
Digital Pressure Gauge
The digital displays are connected to the OEM harness with a Deutsch 8 pin mini-
connector.
Mating Connector: DTM06-08S
Locking Wedge WM-8S
Mating Terminal: 0462-201-20141 20 gauge socket
General Terminal Assignments:
1) NC
2) Primary Pressure Signal
3) Sensor Supply (+ 5 VDC)
4) Power (+ 12 VDC)
5) Ground
6) Sensor Ground
7) NC
8) NC
Not all of the digital displays use all of the terminals.
See individual display pages for application information.
Harnesses are available for the digital displays in various lengths.
These include transmitter and power connections.
Harness Part Numbers by length and application.
5’ 10’ 20’ 30’
Pressure Display 102060 102035 102061 102271
Dual Display “Y” 102294 102295
Display Pigtail 102272 Extension 15’ 103367
Harness
1
2
3
4 8
7
6
5
Wire Insertion View