Class1 106759 - ITL 4LT with 1-wire COM 106296 106299 - Manual (Page 4)

Intelli-Tank Manual (106759)071006 – 4 – Class 1
When the unit is first powered up the LEDs will cycle on individually starting with
the bottom LED (LED 1) and then the LEDs will show current status.
• A
Master unit properly connected to a functioning transducer will display
current tank level information.
• A Master unit not connected to a pressure transducer will alternately flash the
bottom two LEDs.
• A Remote unit connected to a Master unit (through the 1-wire data line) will
mimic the Master unit’s LED condition and flash rate.
• A Remote unit not connected to a Master unit will alternately flash the upper
two LEDs and the lower two LEDs. This indicates a “no data” condition.
Level indications: