Immediate consumer action required – SCT iTSX (Ford 4015,GM 4416 ) User Manual
Page 2
SCT PERFORMANCE, LLC.
User’s Manual
*This product is not legal for sale or use in California on
pollution controlled motor vehicles (Excludes 4015EO)
IMPORTANT NOTES
It is always a good idea to turn-off any vehicle systems that may become active during the tuning process
such as cooling fans, fuel pumps etc. to avoid draining the vehicle’s battery. To disable these functions, consult
your vehicle’s owner’s manual and remove the fuse for each of these systems. Also be sure to turn-off the
vehicle's stereo and HVAC system. Make sure the ignition key is turned OFF before you connect your device to
the vehicle.
Plug the device into the OBD-II port and wait for them main menu screen to appear. The default menu screen is
“Program Vehicle”. If you are using the device for custom tuning, you will need to read the vehicle strategy
first through the “Vehicle Info” main menu screen and send that information to your custom tuning dealer. (See
Section 4.1)
SCT does not recommend using this device with any other tuning module or device that modifies the vehicle
PCM parameters, increases horsepower, torque or modifies transmission characteristics.
Before taking your vehicle to the dealer service department for any type of service or warranty work, you should
first return the vehicle back to the stock configuration. Check engine warning lights can be reset by simply
unplugging the battery cables from the battery for 5-10 minutes. Diagnostic trouble codes can also be read and
cleared through the “Vehicle Info” menu.
IMMEDIATE CONSUMER ACTION REQUIRED!
YOU MUST REGISTER YOUR iTSX DEVICE WITHIN 30 DAYS OF
PURCHASE TO VALIDATE YOUR 1 YEAR LIMITED WARRANTY. YOU
CAN REGISTER YOUR DEVICE FROM OUR HOMEPAGE AT