2 device firmware & tune revision updates, 3 about your sct device – SCT iTSX (Ford 4015,GM 4416 ) User Manual

Page 6

Advertising
background image

SCT PERFORMANCE, LLC.

User’s Manual

1.2 Device Firmware & Tune Revision Updates


From time to time, you may wish to update your device to the latest version of firmware or tune revision. For step by
step instructions on how to update your SCT device, visit

www.SCTFLASH.com

and click on the Tech Support link.

Make sure you have returned your vehicle back to stock before updating your unit.

NOTE: If viewing this document online you can click on the following link to download the SCT Device Updater:

SCT

Device Updater

1.3 About your SCT Device


Available Gasoline Tunes: 93, 91, 87 octane and economy as applicable.
Available Diesel Tunes: Performance, Street, Towing.

Note: Not all options are available for all vehicles.

iTSX VIN locks (marries) to a single vehicle. You cannot use the device to tune a new or different vehicle, until

you have returned the original vehicle back to stock, which will unlock the device. You can only change vehicles
5 times before the unit is permanently locked. To reset the Changes or Unlock device you will need to contact
SCT. Service charges do apply.

Standard pre-programmed tuning files are designed for vehicles with minor performance modifications such as;

cold air kits, high-flow exhaust systems, and other basic modifications. Vehicles that have aftermarket
superchargers or turbochargers will require custom tuning, which can be purchased only through authorized SCT
Custom Tuning Dealers. To locate a dealer near you use the dealer locator on the SCT website at

www.sctflash.com

.

If you later add a blower, turbo or nitrous to your vehicle or add a more ‘wild’ naturally aspirated combination of
parts, you will need to obtain a custom tune from an SCT dealer. The iTSX programmer is flexible enough so
that your original investment will not be lost – it can be loaded with a custom tune from the SCT dealer.

Read your vehicle’s warranty carefully before installing or using this Product. You are solely responsible for
determining whether use or installation of this Product will negate or diminish any applicable warranty coverage.
Under no circumstances will the Seller be liable for the voidance of all or any part of the Buyer’s vehicle
warranty. Rather, the Buyer assumes all risk and responsibility if an automotive manufacturer and/or dealer
voids the Buyer’s vehicle warranty in whole or in part due to use or installation of this product.

The stock file is stored during initial programming. The stock file stays on the programmer until returned to

stock. You should always return your vehicle back to stock before taking your vehicle in to any auto service
facility or before updating your device.


The iTSX is NOT legal for sale or use in California on pollution controlled motor vehicles






Advertising