JB Conversions 16-1206 HD Super Short SYE Kit for the NP231C or NP233C - Manual (Page 7)

7
bearings. The deletion of these bearings is per factory, NVG design.
FIG: 10
15) Verify the length of your mode fork shift rod as shown (Fig.11). If
your shift rod measures 10.2", it will need to be cut down to a length
of 9.380". This is typical to 1988 and 1989 model YJ's.
FIG: 11
16) Be sure the large hub ring is arranged as shown in the photo. It is
possible to install this ring in a reverse orientation therefore causing
malfunction. Place the fork back into the hub groove being sure that
the pads are in place and of good condition (Fig.12).