Apple Power Macintosh 9500 Series - Manual (Page 112)

4 Open the Drive Setup program.
You use the Drive Setup program to update your hard disk.
5 In the list of drives, click your startup disk.
6 Pull down the Functions menu and choose Update Driver.
7 When the update process is finished, quit Drive Setup.
8 Shut down your computer.
9 Start up your computer from disk 1 of the set of system software disks that came with
your computer, or from the CD-ROM disc that contains system software.
See “Starting Up From a CD-ROM Disc” or “Starting Up From a Floppy
Disk” in the section “Initializing a Hard Disk” earlier in this chapter.
The Installer’s Welcome screen appears. You may have to double-click the
System Software Installer icon to open the Installer program.
10 Click OK.
The Easy Install dialog box appears.
102 Chapter 6
For a clean installation,
DO NOT click the
Install button.
If you need to install on a
different disk, click this button.
Disk on which
system software
will be installed