Beyerdynamic MCS-D 200 - Manual (Page 25)

MCS-D 200 Control Unit
E 25
How to select the required interpreter’s booth(s) for the session
Select all booths required for the selected session from the booth list (refer to chapter 3.3.7.1 “ID List”).
Use the up or down navigator button to select the booth required for the session (here: 01). Then press the SET button. The
star identifies the selected booth. Repeat these steps to select more booths.
To remove a selected booth from the session press the RESET button. The star is removed. Repeat these steps if you want to
remove more booths from the session.
Press the EXIT button to leave the menu.
The arrow indicates the active line.
Session number
Booth number
press the ENTER button
The star identifies the selected booth.
Use the up or down navigator button to
scroll through the menu