Beyerdynamic MCS-D 200 - Manual (Page 50)

MCS-D 2073 Microphone Station
E 50
7.1.6 Menu settings
Activate the MENU button. The blue LED will illuminate. The time menu (CLOCK) is displayed.
Select a menu with the navigator buttons
Use the UP or DOWN button to select one of the following menus:
CLOCK as default display
The default display is only shown, when the display is not needed to show any other function.
Format: HOUR – MINUTES – SECONDS.
In the TIME menu of the MCS-D 200 control unit, the system time can be set manually. The system time is automatically
updated when the system is started.
12-33-17 1--0024
CLOCK
12-33-17
press <EXIT>
press <EXIT>
(return without any changes)
press <ENTER>
(changed time is accepted)
press <ENTER>
NEW DEFAULT DISPLAY
CLOCK DEFAULT DISPLAY
(e.g. DEV-ID.)
press the MENU button
and select CLOCK with
the navigator buttons!
DEVICE ID as default display
The default display is only shown, when the display is not needed to show any other function.
The DEVICE ID is also the telephone number of the microphone station. When the device ID has been selected as default
display, the participant can display his telephone number permanently.
1--0024 12-33-17
DEV.-ID
1--0024
press <Esc>
press <Esc>
(return without any changes)
press <ENTER>
(change is accepted)
press <Enter>
session number DEVICE ID number
DEFAULT DISPLAY
(DEV-ID.) NEW DEFAULT DISPLAY
e.g. CLOCK
press the MENU button
and select DEV.ID with
the navigator buttons!