Apple GeoPort Telecom Adapter Kit - Manual (Page 3)

Where to begin
To get started using your hardware and software, turn to the
appropriate section in this chapter for information about
connecting your modem hardware, then proceed to
Chapter 2 for instructions on installing the software.
m If you have the GeoPort Telecom Adapter, follow the
instructions for connecting the adapter in the section
“Connecting your GeoPort Telecom Adapter.”
m If you have the GeoPort Internal Modem or the Express
Modem, follow the instructions for connecting it to the
telephone line in the section “Connecting your internal
modem.”
m If you have a PC Card modem, follow the instructions for
connecting it to your computer in the manual that
accompanies the modem.
Important If you are using a PC Card modem, you need to
choose the correct port setting from the Apple Serial Modem
control panel before you can begin to use it.
See: Chapter 5, “Using Your Modem” for information about
choosing settings in the Apple Serial Modem control panel.
3 Installing Your Hardware