Apple Workgroup Server 9150/120 - Manual (Page 48)

8 Align the card over the expansion slot and press down firmly until the connector is seated.
Note: If you are installing an expansion card that is taller than standard size,
you need to remove the expansion card guide on the inside of the cover.
9 Replace the cover on the server.
Note: Before you replace the cover, you may want to add an additional internal
disk drive, as described in “Installing Internal Disk Drives” later in this chapter.
10 Plug the server’s power cord back into a power outlet.
32 Chapter 3 / Expanding Your Server and Connecting Other Equipment