Apple PC Compatibility Card 12-inch card User Manual
Page 167
2
Gather all the files necessary for installing Trumpet WinSock, including:
m TCPMAN.EXE
m TRUMPWSK.INI
m WINSOCK.DLL
m WINPKT.COM
m ODIPKT.COM
3
Make sure that all the Trumpet WinSock files are in the directory C:\TRUMPET.
4
Refer to “Running the Network Protocol Setup (SETNET) Utility” near the end of this
appendix and follow the instructions there.
5
After running SETNET, make sure your NET.CFG file and the batch file you use to call the
networking software contain the following entries:
NET.CFG
LINK DRIVER MACODI
FRAME ETHERNET_802.2
FRAME ETHERNET_802.3
FRAME ETHERNET_SNAP
FRAME ETHERNET_II
PROTOCOL IPX E0 ETHERNET_802.2
PROTOCOL IP 800 ETHERNET_II
PROTOCOL ARP 806 ETHERNET_II
PROTOCOL RARP 8035 ETHERNET_II
LINK SUPPORT
BUFFERS 8 1600
MEMPOOL 4095
AUTOEXEC.BAT
C:\NWCLIENT\LSL.COM
C:\NWCLIENT\MACODI.COM
C:\NWCLIENT\IPXODI.COM
C:\TRUMPET\ODIPKT.COM 3 107
C:\TRUMPET\WINPKT.COM 107
153
Installing Network Client Software