Apple Using AppleShare Client 3.8.6 - Manual (Page 5)

4
7 Verify that your computer’s startup disk is named in the Installer window as the destination
disk.
If the wrong disk is shown, click Switch Disk until the name of your startup disk appears.
8 Click Install.
9 When a message tells you that installation is complete, restart your computer.
Connecting to a Server
To connect to a server, you need to know one of the following:
m the name of the server and its AppleTalk zone (if your network has AppleTalk zones)
m the server’s IP address or DNS name
For instructions on using the Chooser to connect to a server, look in the Help menu.
Connecting to a Server Automatically
To set up your computer to connect to a server at startup, follow these steps:
1 Connect to the server.
2 Click the server’s icon, then open the File menu and choose Make Alias.
3 Drag the alias from your desktop to your System Folder.
The alias is copied to the Servers folder in your System Folder. ( When you don’t want to
connect to the server automatically, remove the alias from the Servers folder.)
Disconnecting From a File Server
To disconnect from a file server, drag the icon of the server to the Trash. (Or select the volume
and choose Put Away from the File menu.)
You are disconnected from the server automatically when you shut down your computer. The
administrator can also disconnect you from the file server.
Finding Out What Privileges You Have
User Categories
Access privileges determine what files and folders you and other users on a file server can see
or change. The owner of a folder can set access privileges for three user categories: Owner,
User/Group, and Everyone.