Apple Xserve Intel (Late 2006) - Manual (Page 53)

Appendix B Safety and Maintenance 53
 Never force a connector into a port. If the connector and port do not join with
reasonable ease, they probably don’t match. Make sure that the connector matches
the port and that you have positioned the connector correctly in relation to the port.
 Take care not to spill any food or liquid on the Xserve or other components. If you do,
turn off the Xserve immediately and unplug it before cleaning up the spill. Arrange
for an Apple-authorized service provider to inspect or repair the Xserve.
 Protect the Xserve and its components from direct sunlight and rain or other
moisture.
 Keep all ventilation openings clear and unobstructed. Without proper air circulation,
components can overheat, causing damage or unreliable operation.
Protecting the Optical Drive
To keep the optical drive working properly:
 In an emergency, you can eject a disc by holding down the mouse button as the
system starts up. If no mouse is attached, you can eject the disc by using the front
panel controls to start up from the optical drive; for instructions, see the Xserve User’s
Guide on the Admin Tools disc that comes with the Xserve.
You may want to take out the disc before shutting down.
Power Supply
The power supply in the Xserve is a high-voltage component that should not be
opened for any reason, even when the computer is off. If the power supply needs
service, contact your Apple-authorized dealer or service provider.