Apple Impulse Response Utility - Manual (Page 19)

19
Auditioning Your Impulse Response
To really know how your impulse response will sound when used in Space Designer,
you need to be able to listen to it in context. Impulse Response Utility includes an
Audition window for just this purpose; where the loaded impulse response can
convolve test audio files. The Audition window is divided into three sections: the
Impulse Response area, the Monitor area, and the Audio Test Files area.
Impulse Response Utility allows up to five audio files to be loaded/used as sources
when auditioning your impulse response. The Audition window also includes four built-
in test source files.
To open the Audition window:
m Click the Audition IR button.
The Audition window will open. All editing functions are disabled while the Audition
window is open.
The Audition window offers the following parameters:
 Enable checkbox: Enables or disables individual impulse response recordings. Use
these boxes to select the specific file (or files) you want to audition.
 Input ID label: Identifies the specific impulse response file by its speaker > mic
positions.
 Output Channel menu: Selects the physical output channel used for playback of the
selected impulse response.
 Mix field: Determines the ratio of dry test source signal to wet effect signal.