Apple Qmaster 3 - Manual (Page 25)

2 In the dialog that appears, enter the relevant information in the required and optional
fields.
The full command
is displayed here.
Some fields and settings in this dialog are optional, but the following are required:
• The Executable field requires the location of the frame-based rendering
application—make sure it is correct.
• Use the Choose buttons to navigate to and choose the location of the project and
scene files for this job.
• In the Frames section, enter a Start and End frame for the job.
3 In the Command Template section, do one of the following:
• Use the Default Template as is, or adjust it by adding additional command elements
from the pop-up menu.
• Click the Add (+) button to create an additional template, and adjust it by adding
additional command elements from the pop-up menu.
Note: You can change the order of the command elements by dragging them left or
right.
4 If necessary, add command-line instructions in the Options field. Any text entered here
will be appended at the end of the command.
25 Chapter 1 Using Apple Qmaster 3