Apple Xserve (Early 2008) DIY Procedure for Expansion Card - Manual

 Xserve (Late 2006/Early 2008)
073-1092 Rev. B
PCI Expansion Card
Replacement Instructions
Follow the instructions in this document carefully. Failure to follow these instructions could
damage your equipment and void its warranty.
Online instructions are available at http://www.apple.com/support/diy/.
Expansion Card Overview
The Xserve (Late 2006) has two expansion slots:
Slot 1, which accepts full-length (9 inch) PCI-E or PCI-X cards •
Slot 2, which accepts half-length (6.6 inch) PCI-E cards •
The Xserve (Late 2006) accepts expansion cards that meet these specifications:
Slot 1:
Accepts 64-bit PCI-X 133 MHz cards (using a PCI-X riser) •
Also accepts 32-bit or 64-bit 33, 66, or 100 MHz PCI or PCI-X cards with 3.3 volt universal •
signaling
Also accepts PCI-E x8 cards (using a PCI-E riser)
•
9 inch maximum length •
25 Watt maximum power consumption •