Apple Soundtrack Pro 3 - Manual (Page 260)

Load a Saved Noise Print Preset
Once a noise print preset has been saved, it can be loaded and reused at any time.
To load a saved noise print preset
1 Choose Process > Noise Reduction > Reduce Noise.
The Reduce Noise HUD appears.
2 Click the Show Presets button.
The Presets pane appears.
3 Select the preset you wish to apply from the Presets list.
4 Press the Apply Preset button.
The saved preset is loaded.
Reduce Noise
The Reduce Noise command uses the frequency content of the noise print to reduce
noise in the audio file or selection.
To reduce noise using the noise print
1 In the waveform display, select the part of the audio file in which you want to reduce
noise.
2 Choose Process > Noise Reduction > Reduce Noise.
The Reduce Noise HUD appears.
260 Chapter 9 Processing Audio Files