Viewer lut, Gamut alarm, Troubleshooting – Apple Shake 4 Truelight User Manual
Page 13
Truelight
The Truelight Viewer
Shake Node
11
Viewer LUT
Truelight can also be selected as a viewer LUT. Right click on the viewer LUT control to access
the parameters.
Gamut alarm
Some colours can be displayed on film but cannot be reproduced on a particular electronic
display such as an LCD or CRT monitor. These colours are considered as ‘out-of-gamut’ for that
display device. When the showOutOfGamut button is enabled, these out of gamut colours are
highlighted and the colours in gamut are rendered neutral. In normal operation, when the Gamut
Alarm is disabled, the Truelight system gets as close to the colours as the display gamut allows.
Troubleshooting
The viewer will put a yellow cross over the image if there is a problem with the viewer settings or
profile. This is most likely to be because the default 'monitor' display calibration hasn't been
created (see page 3).
For further assistance please visit the Truelight FAQs page in the Truelight support section of the
FilmLight website: