Apple Multiple Scan 15 Display - Manual (Page 14)

Using more than one monitor
If your computer has NuBus expansion slots, you can use the Apple Multiple
Scan 15 Display with one or more additional monitors connected to your
computer. You may need a video card for each additional monitor you are
using. See the manuals that came with your computer for information on
working with additional monitors.
Connecting the monitor to your computer
Follow these steps to connect the Apple Multiple Scan 15 Display to your
computer:
IMPORTANT Before you connect any cords or cables, make sure that your
computer is turned off and unplugged.
1 Connect the socket end of the power cord to the power cord receptacle on the back of
the monitor.
≤
WARNING If your monitor is equipped with a three-wire grounding
plug—a plug that has a third (grounding) pin—this plug will fit only a
grounded AC outlet. This is a safety feature. If you are unable to insert
the plug into the outlet, contact a licensed electrician to replace the
outlet with a properly grounded outlet. Do not defeat the purpose of the
grounding plug!
8 Chapter 1