Connecting a music keyboard to your computer, Connecting other music equipment – Apple GarageBand 2.0 User Manual
Page 76
76
Appendix B
Connecting Music Equipment To Your Computer
Connecting a Music Keyboard to Your Computer
If you play a keyboard instrument, you can connect a MIDI-compatible music keyboard
to your computer to play and record Software Instruments.
To connect a music keyboard to play Software Instruments:
•
If the keyboard is a USB MIDI keyboard, connect the USB cable to the keyboard and
to your computer.
•
If the keyboard is a standard MIDI keyboard, connect the keyboard to a MIDI
interface using standard MIDI cables, and connect the interface to your computer.
Be sure to follow the instructions that came with the keyboard, which may include
installing the correct driver on your computer.
Connecting Other Music Equipment
You may also want to connect speakers or monitors to your computer to hear your
songs play back with greater audio quality than possible from your computer’s speaker.
A variety of monitors and speakers are available, including speakers you can connect
directly to your computer's audio out port, through a USB port, or using an audio
interface.
If you connect an audio interface to your computer, you set the audio interface as the
audio input device for GarageBand. Before setting the audio input device, be sure to
install any necessary driver software for the audio interface.
To set an audio interface as the audio input device:
1
Choose GarageBand > Preferences, then click the Audio/MIDI tab.
2
In the Audio/MIDI pane, choose the audio interface from the Audio Input pop-up
menu.
If you connect a microphone, an instrument, or other audio device directly to your
computer’s audio-in port, you set may need to configure input settings for it in the
Sound pane of your computer’s System Preferences.
To configure input settings in System Preferences:
1
Choose System Preferences from the Apple menu, then click the button for Sound
Preferences.
2
In the Sound Preferences pane, click the Input tab.
3
Select Line In from the sound input devices list, then drag the “Input” volume slider to
set the input level.