Apple Studio Display (17-inch, CRT) - Manual (Page 12)

12 Chapter 1
3 Insert the monitor connector into the monitor port (marked with
™) on the back of the
computer and tighten the thumbscrews.
If you installed a graphics card in your computer, connect the display cable to the graphics
card’s port instead. For information about installing graphics cards, see the manual that came
with your computer or graphics card.
Turning the Display On
To turn on the monitor for the first time:
1 Plug your computer’s power cord in the power outlet.
2 Press the power button on the front-right side of the display. Then start up your computer.
The monitor’s green power indicator light goes on. (It may turn amber until your computer
comes on.) If the green light does not go on, press the monitor’s power button again. If this
doesn’t work, shut down and unplug your computer and make sure you’ve connected the
monitor to your computer properly (see “Connecting the Display to Your Computer” on
page 11).
Monitor port icon
Monitor connector
Power button